These products cannot be viewed in our showroom.
Fire resistance tested and certified for 2 hours according to VDMA, S120DIS. Break-in resistance S-series tested and certified according to CEN 2 (€ 23,000) The Lampertz fire-resistant data safes of the S-series are constructed in such a way that the internal temperature remains well below the critical limit of 55 degrees even during prolonged exposure to fire. Furthermore, ingenious thresholds and seals protect the contents against gases, vapour and (extinguishing!) water. Magnetism does not affect the information carriers either. Magnetism does not affect the data media either. The walls and door of the S-series are fitted with a burglary-resistant filling, achieving a high level of burglary resistance. For storage of data media, the safe can be divided with shelves or storage drawers.
| Model | External dimensions HxWxD mm | Internal dimensions HxWxD mm | Weight | Content | Shelves | Shipping rate | Price |
|---|---|---|---|---|---|---|---|
| Data safe Lampertz model S11 | 730 x 756 x 832 | 332 x 446 x 478 | 288 KG | 71 L | 0 | 4 | Your takeaway: On request |
| Data safe Lampertz model S12 | 1050 x 756 x 832 | 652 x 446 x 478 | 380 KG | 139 L | 0 | 5 | Your takeaway: On request |
| Data safe Lampertz model S13 | 1293 x 756 x 832 | 895 x 446 x 478 | 456 KG | 191 L | 0 | 5 | Your takeaway: On request |
| Data safe Lampertz model S14 | 1850 x 756 x 832 | 1452 x 446 x 478 | 631 KG | 310 L | 0 | 6 | Your takeaway: On request |
| Data safe Lampertz model S15 | 1850 x 1163 x 832 | 1452 x 850 x 478 | 922 KG | 590 L | 0 | 6 | Your takeaway: On request |
| Weight | N/A |
|---|---|
| Model | Datasafe model Lampertz model S11, Datasafe model Lampertz model S12, Datasafe model Lampertz model S13, Datasafe model Lampertz model S14, Datasafe model Lampertz model S15 |
| Burglar-proof | Yes |
| Fire protection | EN1047-1 / S120DIS (120 minutes on data) |
| Coverage indication | € 2.500,- |
| Valuables | To be determined in consultation with insurer |
| Locks | Class 1 double-bit key lock (incl. 2 keys) |
| Dimensions | 5 |
| Direction of rotation | Clockwise |
| Colour | Light grey (RAL 7035) |
| Warranty | 1-year warranty |
Fire resistance tested and certified for 2 hours according to VDMA, S120DIS. Burglar resistance S-series tested and certified in accordance with SAFE 2 (€ 2,500)
Lampertz S-series fire-resistant data safes are constructed in such a way that the internal temperature remains well below the critical limit of 55 degrees even during prolonged exposure to fire.
Furthermore, ingenious thresholds and seals protect the contents from gases, vapour and (extinguishing!) water. Magnetism does not affect the information carriers either. The walls and door of the S-series are fitted with burglary-resistant padding, providing a high level of burglary resistance. For storage of data media, the safe can be divided with shelves or storage drawers.
Note!: the external dimensions do not include (85 mm) fittings. The data safe is without interior supplied, you can arrange the cabinet as you wish.
Fire resistance standard for digital data carriers according to NEN-EN 1047-1:
- S120DIS: In a fire development for 120 minutes followed by residence in the smouldering environment, the indoor temperature remains below ,50° C and the relative humidity is limited to a maximum of 85%.
These products cannot be viewed in our showroom.
The Money and Value Storage Association (VGW) recommends that safes, up to a weight of 1,000 kg should be properly anchored so that they provide sufficient resistance to being taken away quickly. In 91% of burglaries where a safe is found, it was taken rather than opened on the spot.
Don't take a risk and anchor your safe properly!
The segment anchor is supplied with your safe as standard. This is the lightest anchor in Van den Hoven's range for a concrete foundation.
| Pull-out value in kg: | 560 |
| Drill diameter in mm: | Ø12 |
| Drilling depth in mm: | 65 |
| Minimum floor thickness in mm: | 90 |
The heavy-duty anchor has a higher pull-out value than the segment anchor, sits tightly in the anchoring hole, and can be dismantled after assembly, making it extremely suitable for safes with floor and wall anchoring.
| Pull-out value in kg: | 900 |
| Drill diameter in mm: | Ø14 |
| Drilling depth in mm: | 85 |
| Minimum floor thickness in mm: | 100 |
The anchor rod with chemical paste has the highest pull-out value and does not cause tension in the floor and/or wall. The glass tubes with anchor rods can be installed without special tools. All you need is a drill and a hammer.
| Pull-out value in kg: | 1600 |
| Drill diameter in mm: | Ø14 |
| Drilling depth in mm: | 110 |
| Minimum floor thickness in mm: | 150 |
When floor and wall anchoring both require chemical anchoring, we recommend using anchor rods with chemical paste in the floor and an anchor rod with chemical sleeve for the back. Assembly of the chemical sleeve requires special tools and can only be carried out by Van den Hoven.
| Pull-out value in kg: | 1500 |
| Drill diameter in mm: | Ø22 |
| Drilling depth in mm: | 100 |
| Minimum floor thickness in mm: | 150 |
In mechanical anchoring by Van den Hoven, heavy-duty anchors are used as standard. Chemical anchoring uses anchor rods with chemical paste with a higher pull-out value than glass impact anchors as standard.
Proper anchoring of the safe is only possible with a proper foundation. Choose a suitable place for your safe on a concrete floor and/or against a concrete wall. For lighter safes, anchoring in the floor and wall is best. Also take into account the dismantling of the safe. Dismantling is always possible except when anchoring to the floor and wall using regular anchors. Dismantling with floor and wall anchoring is only possible if you also choose anchoring with the chemical sleeve. Safes that are only anchored to the floor or wall can always be dismantled.
All VDH safes under 1,000 kg are fitted as standard with at least two anchoring holes in the floor. We recommend chemically anchoring your safe because this gives the highest pull-out value and because these anchors are placed tension-free.
Copyright ©2025 Brandkastenfabriek N.A. van den Hoven & Zn. B.V. | Website Realisation: PDK Online Success