Where there are high requirements for fire and burglary resistance, the DFB door from Brandkastenfabriek van den Hoven is the solution. Thanks to a well thought-out construction and with the application of the right materials, the DFB door is the optimum protection against fire and burglary. The fire- and burglary-resistant safe door model DFB has been tested according to EN 1634-1 and NEN 6069 in the Peutz Laboratory for Fire Safety and has a fire-resistance of 120 minutes. The door in combination with the 3-sided locking mechanism offers sufficient protection against burglary.
| Model | Safe door model DFB |
|---|---|
| Burglar-proof | Yes |
| Fire protection | EN 1634-1 and NEN 6069 (120 minutes) |
| Valuables | To be determined in consultation with insurer |
| Locks | Class 1 double-bit key lock (incl. 2 keys) |
| Dimensions | 1 |
| Direction of rotation | Left and right-handed |
| Colour | Grey anti-corrosion primer |
| Warranty | Certificate with 2-year all-in guarantee |
| External dimensions h×w×d (mm) | See text accompanying description. |
| Internal dimensions h×w×d (mm) | See text accompanying description. |
| Shipping rate | 7 |
Where there are high requirements for fire and burglary resistance, the DFB door from Brandkastenfabriek van den Hoven is the solution. Thanks to a well thought-out construction and with the application of the right materials, the DFB door is the optimum protection against fire and burglary. The fire- and burglary-resistant safe door model DFB has been tested according to EN 1634-1 and NEN 6069 in the Peutz Laboratory for Fire Safety and has a fire-resistance of 120 minutes. The door in combination with the 3-sided locking mechanism offers sufficient protection against burglary.
Implementation:
The DFB door is supplied as standard with a daylight size of 2300 × 900mm (h×w). The size of the door can be adjusted in both height and width. The DFB door is 140mm thick and is supplied in a grey, rust-resistant primer.
Confirmation:
The DFB door is installed in a concrete or sand-lime brick wall with a minimum thickness of 200mm. The door is welded to a metal profile anchored to the wall. The metal profile can be ordered as an option from Van den Hoven.
Bottom sill:
As standard, the DFB door is supplied with a high lower sill. This sill is 70mm high. After installation, a floor of maximum 40mm can be poured. It is also possible to have the DFB door with a low sill. This should then be placed on the finished floor.
Final work:
DFB doors are fitted with a key lock including 2 keys. An emergency unlocking system is optionally available. The door is not self-closing.
Direction of rotation:
DFB doors are available both right- and left-handed.
The Money and Value Storage Association (VGW) recommends that safes, up to a weight of 1,000 kg should be properly anchored so that they provide sufficient resistance to being taken away quickly. In 91% of burglaries where a safe is found, it was taken rather than opened on the spot.
Don't take a risk and anchor your safe properly!
The segment anchor is supplied with your safe as standard. This is the lightest anchor in Van den Hoven's range for a concrete foundation.
| Pull-out value in kg: | 560 |
| Drill diameter in mm: | Ø12 |
| Drilling depth in mm: | 65 |
| Minimum floor thickness in mm: | 90 |
The heavy-duty anchor has a higher pull-out value than the segment anchor, sits tightly in the anchoring hole, and can be dismantled after assembly, making it extremely suitable for safes with floor and wall anchoring.
| Pull-out value in kg: | 900 |
| Drill diameter in mm: | Ø14 |
| Drilling depth in mm: | 85 |
| Minimum floor thickness in mm: | 100 |
The anchor rod with chemical paste has the highest pull-out value and does not cause tension in the floor and/or wall. The glass tubes with anchor rods can be installed without special tools. All you need is a drill and a hammer.
| Pull-out value in kg: | 1600 |
| Drill diameter in mm: | Ø14 |
| Drilling depth in mm: | 110 |
| Minimum floor thickness in mm: | 150 |
When floor and wall anchoring both require chemical anchoring, we recommend using anchor rods with chemical paste in the floor and an anchor rod with chemical sleeve for the back. Assembly of the chemical sleeve requires special tools and can only be carried out by Van den Hoven.
| Pull-out value in kg: | 1500 |
| Drill diameter in mm: | Ø22 |
| Drilling depth in mm: | 100 |
| Minimum floor thickness in mm: | 150 |
In mechanical anchoring by Van den Hoven, heavy-duty anchors are used as standard. Chemical anchoring uses anchor rods with chemical paste with a higher pull-out value than glass impact anchors as standard.
Proper anchoring of the safe is only possible with a proper foundation. Choose a suitable place for your safe on a concrete floor and/or against a concrete wall. For lighter safes, anchoring in the floor and wall is best. Also take into account the dismantling of the safe. Dismantling is always possible except when anchoring to the floor and wall using regular anchors. Dismantling with floor and wall anchoring is only possible if you also choose anchoring with the chemical sleeve. Safes that are only anchored to the floor or wall can always be dismantled.
All VDH safes under 1,000 kg are fitted as standard with at least two anchoring holes in the floor. We recommend chemically anchoring your safe because this gives the highest pull-out value and because these anchors are placed tension-free.
Copyright ©2025 Brandkastenfabriek N.A. van den Hoven & Zn. B.V. | Website Realisation: PDK Online Success